Ronix Kinetik Project 3D Core Springbox 2 Wakeboard 2019

Be the first to review this product

A hybrid flexing park board that's built for speed, control and superb press-ability
Ronix Kinetik Project 3D Core Springbox 2 Wakeboard 2019 Ronix Kinetik Project 3D Core Springbox 2 Wakeboard 2019
Ronix Kinetik Project 3D Core Springbox 2 Wakeboard 2019

Overview

A hybrid flexing park board that's built for speed, control and superb press-ability

The Kinetic Project 3D Core Springbox 2 from Ronix is built for the world's best park rider - Dominik Hernler. This advanced cable park board combines the classic Flexbox 1 core profile with a fresh approach to pressure points. The 2019 Kinetic Project Springbox 2 aims to keep your lines fast, flowing and technical with a refined flex pattern. Stiffer in the centre but more flex in the tip and tail for presses without the loss of pop.

Fast and responsive through the park

The cable kingpin is refined for 2019 with a new 3D wood core that runs top to bottom with individualised pressure points for the most in feel on features or on the water, as opposed to the conventional tip to tail, or rail to rail wood layup. A design with less rocker for infinite top water speed, reduced drag and more overall contact.

Completely redefined flex

The 2019 Ronix Kinetik Project Springbox 2 features the exact same core, profile, and rocker as the Flexbox 1, but with different pressure points. A more rigid mid-section was designed so a rider can rock into a press - then once locked in - a softer end tip/tail section creates the ability to move side to side or just exaggerate the angle of a press. Springbox rods were added thru the tip/tail of the box area giving the rider more spring to their ollie off the water or a feature.

The Best Bits

The best bits…

  • An advanced hybrid-flex wakeboard for cable park ripping
  • Fiberglass Rods retain powerful pop
  • Less rocker makes for more responsive control
  • Springbox 2 - stiff in the centre but flexy enough for laidback pressing
  • Speedwalls for durability
  • 'Press' Flex profile -stable but easy pressing
  • G&R Technology
  • 3D wood for infinite pressure points
  • Sintered base for smooth speed
  • Designed and ridden by the world's best park rider - Dominik Hernler

Size Guide

Check out the Ronix Wakeboard Sizing Guide below:

SIZE (cm) HEIGHT (in) STANCE (in) CENTER (in) SURFACE (in-squared) WEIGHT (lbs range)
133 2.7″ 19″-25″ 16.7″ 762 Up to 175 lbs
138 2.9″ 20″-26″ 16.9″ 810 Up to 185 lbs
143 3.0″ 21″-27″ 17.1″ 844 160 lbs and Up
148 3.2″ 22″-28″ 17.3″ 882 175 lbs and Up

Specifications

Ronix Kinetik Project 3D Core Springbox 2 Wakeboard 2019
General
 
Gender
Male

Reviews

Add Review

  • Comodo Secure